Skip to main content
. 2014 Dec 18;21(6):530–540. doi: 10.1089/ten.tec.2014.0214

FIG. 2.

FIG. 2.

Fabrication of tube-in-stent valve. (A) Mold components and tubular mesh with silicone connectors; (B) tubular construct placed in a polymethylmethacrylate (PMMA) holder for static cultivation; (C) tube-in-stent seen from the vascular, (D) ventricular and (E) longitudinal side after insertion into a silicone conduit featuring the sinuses of Valsalva.