Skip to main content
. 2013 Aug 19;118:301–352. doi: 10.6028/jres.118.015

Fig. 47.

Fig. 47

Sample heater powers H1 and H2 versus Ic for a set measurements on a Nb-Ti sample at 5 K, in gas, and on the VTS probe. The solid symbols indicate the average heater power before each V-I curve was taken and the open symbols indicate the average heater power during the time that the sample current was near Ic. T bias (T1−T2) was set to 60 mK, which allowed H2 to be lower without H1 going to zero.