Table 6.
Values of the parameters used in the implementation of the flip-flop operational gate shown in Figure 5.
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Flip-flop operational gate | |||
| αSA1 | 80.0 | βSA1 | 0.0 |
| αA1A2 | 10.0 | βA1A2 | 5.0 |
| αRB2 | 10.0 | βRB2 | 0.0 |
| αB1B2 | 9.0 | βB1B2 | 9.0 |
| αI1A1 | 52.0 | βI1A1 | 9.0 |
| αI1A2 | 52.0 | βI1A2 | 9.0 |
| αI2B1 | 10.0 | βI2B1 | 2.0 |
| αI2B2 | 10.0 | βI2B2 | 2.0 |
| αA2I2 | 52.0 | βA2I2 | 0.0 |
| αB1I1 | 10.0 | βB1I1 | 0.0 |
| Parameter | Value | ||
| pi(t) = pj(t) (Hz) | 155 | ||
| pS(t) = pR(t) (Hz) | 57.8 | ||
| pI1(t) = pI2(t) (Hz) | |||
| pA1(t) (Hz) | 150 | ||
| pA2(t) (Hz) | 150 | ||
| pB1(t) (Hz) | 250 | ||
| pB2(t) (Hz) | 250 | ||
| δS (Hz) | 220 | ||
| δR (Hz) | 200 | ||
| fS = fR (Hz) | 8.5 | ||
| ξS,R,Ai, Bi, Ii (Hz) | 1000 | ||