Table 1.
Averaged |kmax| values from the entire mesh surface. Results for Gynemesh (n=5) and Restorelle (n=5) samples are shown for both 1 and 10N under boundary conditions (BCs) 1, 2, and 3. Reported p-values are from a Friedman’s test, which tested the impact of BCs on Mean(|kmax|).
| Mean (|kmax|) (cm−1) | |||||
|---|---|---|---|---|---|
| Mesh | Load (N) |
BC 1 | BC 2 | BC 3 | p |
| Gynemesh | 1 | 0.0608 (0.0557 - 0.0968) |
0.162 (0.126 - 0.230) |
0.406*
(0.320 - 0.453) |
0.007 |
| 10 | 0.178*
(0.153 - 0.219) |
0.719 (0.468 - 0.732) |
1.834*
(1.438 - 1.945) |
0.007 | |
| Restorelle | 1 | 0.068 (0.0655 - 0.0703) |
0.176 (0.174 - 0.181) |
0.233*
(0.230 - 0.252) |
0.015 |
| 10 | 0.0698*
(0.0694 - 0.0774) |
0.476 (0.397 - 0.487) |
1.170*
(1.130 - 1.222) |
0.007 | |
*
indicates differences between Gynemesh and Restorelle at the same load and BC (p < 0.05). Values are represented as Median (25th quartile - 75th quartile).