Skip to main content
. 2015 Sep 17;42(10):5913–5918. doi: 10.1118/1.4930803

TABLE I.

Summary of results with one standard deviation measurement uncertainty.

Nominal rod diameter
1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.0 mm 4.8 mm
CT diameter 3D printed micro deluxe (mm) 1.23 ± 0.04 1.62 ± 0.05 2.46 ± 0.10 3.20 ± 0.07 3.91 ± 0.05 4.74 ± 0.07
CT diameter commercial micro deluxe (mm) 1.23 ± 0.04 1.66 ± 0.03 2.40 ± 0.02 3.21 ± 0.02 3.96 ± 0.01 4.78 ± 0.01
Percent difference 0.07   −2.36 2.30 −0.26 −1.20 −1.09
PET diameter 3D printed micro deluxe (mm) N/A 1.69 ± 0.25 2.76 ± 0.23 3.67 ± 0.21 4.31 ± 0.13 5.21 ± 0.12
PET diameter commercial micro deluxe (mm) N/A 1.75 ± 0.23 2.64 ± 0.21 3.70 ± 0.16 4.28 ± 0.08 5.17 ± 0.04
Percent difference N/A −3.22 4.63 −0.90 0.67 0.91
Normalized activity, 3D printed micro deluxe N/A 0.54 ± 0.05 0.74 ± 0.06 0.83 ± 0.04 0.94 ± 0.04 0.98 ± 0.03
Normalized activity, commercial micro deluxe N/A 0.55 ± 0.04 0.70 ± 0.05 0.80 ± 0.05 0.92 ± 0.02 1.00 ± 0.02
Percent difference N/A −2.16 6.18 3.45 1.53 −2.01