. 2014 Nov 28;5(4):942–951. doi: 10.3390/insects5040942

Table 1.

Insecticides used in the study.

Product	% Active ingredients	How Applied
Natural, 25(b), or Green Products
Alpine dust (BASF Corp., Florham Park, NJ, USA)	95.0% diatomaceous earth	0.32 oz per 10 ft²
Alpine dust (BASF Corp., Florham Park, NJ, USA)	0.25% dinotefuran	0.32 oz per 10 ft²
BBT-2000 (herbal product; primarily cedar and soybean oil) (Swepe-Tite LLC, Tupelo, MS, USA)	4.0% cedar oil	Per label, “as a fine mist”
	1.0% soybean oil	Per label, “as a fine mist”
Cimexa (Rockwell Labs, Kansas City, MO, USA)	100% amorphous silica gel	2 oz per 100 ft²
Cimi-Shield Protect (PestBarrier Inc., Carson, CA, USA)	2.38% soybean oil	Per label, “mix with distilled water, place in never-used spray container, shake vigorously, fan spray from 24 inches, 3 linear ft per second”
	13.18% calcium silicate
	9.14% aluminum sodium silicate
	7.52% iron oxide
	7.38% sodium sulfate
	7.32% magnesium silicate
	4.20% potassium sulfate
	2.38% sodium benzoate
EcoRaider (Reneotech Inc., North Bergen, NJ, USA)	1.0% geraniol	Per label, “fan spray until wet”
	1.0% cedar oil
	2.0% sodium lauryl sulfate
Mother Earth D (Whitmire Micro-Gen, Florham Park, NJ, USA)	100% diatomaceous earth	0.5 oz per 10 ft²
Traditional Residual Products
Invader (FMC Corp., Philadelphia, PA, USA)	1.0% propoxur	Per label, “crawling pests, 1 s spray per spot”
Temprid Readyspray (Bayer Corp., Monheim, Germany)	0.025% cyfluthrin and 0.050% imidacloprid	Per label for spot treatment, “spray 12 to 18 inches from surface, 4 s per 2 ft²”
Transport GHP (FMC Corp., Philadelphia, PA, USA)	22.73% acetamiprid	0.3 oz per gallon water per 1000 ft²
Transport GHP (FMC Corp., Philadelphia, PA, USA)	27.27% bifenthrin	0.3 oz per gallon water per 1000 ft²