Skip to main content
. 2015 Sep 15;3(9):2325967115603654. doi: 10.1177/2325967115603654

Figure 1.

Figure 1.

Toe-grip strength. The digital dynamometer was fixed to a wooden foundation plate, and a 4-mm–diameter stainless wire was attached to the area of the dynamometer, to which force would be applied. This served as a bar to be gripped with the toes. Measurements were conducted while both the ankles and feet were in a neutral position. The position of the toes was checked to ensure that the toes (from the first to the fifth toe) were applied against the toe-grasping bar, and the measurements were carried out while the lower leg was attached to a fixing board at the anterior surface of the leg.