Skip to main content
. 2015 Nov 27;2:84. doi: 10.3389/fmed.2015.00084

Table 5.

Two-compartment population analysis of IMP288 pharmacokinetics.

Parametera k2,1 (h−1) k1,2 (h−1) AS BS MR kel (h−1) Volume/m2 (L/m2) Vc (L) Clearance (L/h)
Population values
Estimation 0.027 0.019 1.42 0.182 NA NA 6.38 NA NA
SD 0.001 0.002 0.07 0.012 NA NA 0.27 NA NA
Individual values
Patient 1, indium 0.027 0.021 1.35 0.169 124.2 0.226 6.69 13.4 3.04
Patient 1, lutetium 0.024 0.021 1.37 0.172 125.5 0.241 6.50 13.1 3.15
Patient 2, indium 0.026 0.023 1.31 0.167 40.7 0.250 6.54 9.7 2.43
Patient 2, lutetium 0.027 0.022 1.22 0.156 40.1 0.219 6.63 9.9 2.16
Patient 3, indium 0.028 0.015 1.53 0.199 35.7 0.185 6.23 16.8 3.11
Patient 3, lutetium 0.028 0.017 1.43 0.183 37.8 0.165 6.25 16.8 2.78
Patient 4, indium 0.026 0.026 0.92 0.141 22.6 0.112 6.90 12.7 1.43
Patient 4, lutetium 0.029 0.019 1.29 0.167 22.0 0.173 6.78 12.5 2.17
Patient 5, indium 0.027 0.017 1.53 0.196 22.5 0.235 6.15 12.0 2.82
Patient 5, lutetium 0.028 0.017 1.52 0.196 31.1 0.249 6.13 11.9 2.97
Patient 6, indium 0.027 0.019 1.41 0.179 109.0 0.291 6.44 11.2 3.25
Patient 6, lutetium 0.028 0.021 1.31 0.170 18.8 0.179 6.93 12.0 2.15
Patient 7, indium 0.027 0.022 1.41 0.181 3.3 0.146 6.21 12.0 1.76
Patient 7, lutetium 0.028 0.018 1.41 0.181 3.2 0.137 6.54 12.7 1.74
Patient 8, indium 0.028 0.018 1.44 0.182 2.3 0.161 6.18 10.4 1.68
Patient 8, lutetium 0.028 0.020 1.16 0.174 2.5 0.124 6.49 10.9 1.36
Meanb 0.027 0.020 1.35 0.176 0.193 6.47 12.4 2.37
SD 0.001 0.003 0.16 0.015 0.052 0.27 2.0 0.65
CV (%) 4.5 14.3 11.5 8.6 27.0 4.1 16.4 27.5

aThe transfer rates (k2,1 and k1,2), the central compartment volume per body surface area unit (m2), and the two parameters A and B were adjusted using a two-compartment model. Estimations of the population adjusted parameters are given together with their estimated SD. The central compartment volume was a dependent parameter (Vc = volume/m2 × patient body surface area). Clearance was calculated as AS × MRBS, MR being the ratio of the number of moles of injected IMP288 to the number of moles of TF2 present in the circulation at the time of IMP288 injection and the elimination constant kel as clearance/Vc.

bThe mean, SD, and CV for each parameters were calculated from individual estimations.