Table 3.

Diameter of pores within the set range. Pores with a diameter of more than 600 μm are not mentioned within the table. PN T0 and PN T1 show the average number of pores per construct within the set range for T0 and T1, respectively. Δ(1−T0/T1) is the difference in percentage of pore numbers at T0 and T1. The p-value shows significances after paired t-testing as described in section ‘Statistics’, p<0.05 is set as significant.

diameter (μm)	[0, 100)	[100, 200)	[200, 300)	[300, 400)	[400, 500)	[500, 600)
PN T0	204	398	228	78	31	18
PN T1	199	383	188	86	27	5
Δ(1−T0/T1) (%)	−2.36	−3.84	−21.20	9.31	−15.30	−270.83
p-value	0.704	0.219	<0.001	0.116	0.329	<0.001