Table 1. Parameters used in FEM modeling of heat transfer.

Parameters	Value	Unit
Voltage	6 × 10−5	V
Conductivity (CNT)	1.29	S/cm
Specific heat capacity (CNT)	0.85	J/(g·k)
Specific heat capacity (Polymer)	0.50	J/(g·k)
Inner diameter (CNT)	20	nm
Outer diameter (CNT)	40	nm
Separation distance of CNTs	120	nm
Film layer thermal resistance	8.3 × 10−5	K · m2/W
Thermal conductivity (CNT)	1000	W/(m·k)
Thermal conductivity (Polymer)	0.2	W/(m·k)