Skip to main content
. Author manuscript; available in PMC: 2016 Apr 22.
Published in final edited form as: IEEE Trans Nucl Sci. 2016 Jan 11;63(2):620–629. doi: 10.1109/TNS.2015.2499600

Fig. 3.

Fig. 3

Standard System Configuration. A single Detector Unit (DU) (shown in Fig. 1.) is connected (through a Coincidence Interface board) to a single passive, no active components, Multiplexer Board (MB-1) in a Coincidence Unit (shown in Fig. 2). Therefore, up to 8 Detector Units can be connected in this configuration.