Table 1.
Materials composition.
| Resin composite | Manufacturer | Resin matrix | Filler | Batch # |
|---|---|---|---|---|
| SDR™
Microhybrid |
Dentsply DeTrey |
Modified UDMA EBPADMA TEGDMA |
Ba-Al-F-B-Si-glass Sr-Al-F-Si-glass (68 wt%., 45 vol%) |
1105141 |
| Esthet•X® HD Microhybrid |
Dentsply DeTrey |
Bis-GMA adduct Bis-EMA adduct TEGDMA |
Ba-F-Al-B-Si-glass Nanofiller silica (77 wt%; 60 vol%) |
1006292 |
|
| ||||
| Adhesive | Manufacturer | Chemical composition | Instructions | Batch # |
|
| ||||
| Prime&Bond®NT™
2-step etch and rinse adhesive |
Dentsply DeTrey |
Di- and trimethacrylate resins PENTA Photoinitiators Stabilizers Nanofillers Acetone |
Apply 36% phosphoric acid for 15 seconds; spray and rinse with water for 15 seconds; blot dry conditioned areas; apply adhesive and leave the surface wet for 20 seconds; gently dry for at least 5 seconds; polymerize for 10 seconds; apply a second layer of adhesive | 1109001528 |
Bis-GMA (bisphenol A dimethacrylate); Bis-EMA (bisphenol A polyethylene glycol diether dimethacrylate); UDMA (urethane dimethacrylate); TEGDMA (triethylene glycol dimethacrylate); EBPADMA (ethoxylated bisphenol A dimethacrylate).