Skip to main content
. Author manuscript; available in PMC: 2016 May 11.
Published in final edited form as: Adv Opt Photonics. 2015 Jun 30;7(2):276–378. doi: 10.1364/AOP.7.000276

Figure 68.

Figure 68

Step 7. Caged assembly for excitation beam. Uses four 30-mm cage connector plates (CP08), four 12″ rods, four 4″ rods (joined by four ERSCA connectors), and three right-angle kinematic mirror mounts (KCB1). The two end kinematic mirror mounts are joined using four ERSCA connectors and four 0.5″ rods.