Figure 6.

100% (μ_s′ = 5–26 cm⁻¹, μ_a = 0–10 cm⁻¹) of both reflectance LUTs were validated with acceptable percent errors less than 10%. Following validation, optical properties can be reliably extracted from samples with unknown optical properties using the LUT-based inverse model. (a,b) Reflectance LUTs were interpolated with raw data from calibration phantoms and (c) shows a ratio of the 730 μm SDS to 374 μm SDS LUTs. (d,e) Reflectance LUTs were validated with raw data from the bovine hemoglobin-based validation phantoms and (f) shows the validated ratio of the 730 μm SDS to 374 μm SDS LUTs.