Skip to main content
. 2016 May 30;11:2431–2442. doi: 10.2147/IJN.S101673

Table 2.

Elemental composition of the surfaces of the tested coatings expressed as at%

Group # Samples description (washing parameters) Ti (at%) Sr (at%) O (at%)
1 1,500 nm (22 minutes) 24.3±0.3 5.8±0.2 69.9±0.5
2 2,000 nm (no wash) 22.2±0.5 9.1±0.03 68.6±0.5
3 2,000 nm (industrial wash) 24.8±0.5 5.2±0.1 70.0±0.3

Note: It is evident that the washing procedures reduce the surface Sr content of the two untreated coatings.

Abbreviation: at%, atomic percentage.