| Coil dimensions | Windings | Coil below sample | Coil above sample | ||||||
| Coil | R1 [mm]a | W [mm]b | H [mm]c | No. of windings | Wire-Ø [mm] | R [Ω]d | L [mH]e | R [Ω]d | L [mH]e |
| Measurement | 1.0 | 4.0 | 1.7 | 2 × 600 | 0.08 | 47.67 | 0.95 | 47.66 | 0.95 |
| Excitation | 3.8 | 8.5 | 1.0 | 476 | 0.10 | 29.90 | 1.56 | 29.70 | 1.45 |
| Driver | 5.0 | 8.5 | 5.0 | 2,000 | 0.12 | 190.75 | 36.90 | 141.28 | 37.90 |
| aR1 is the inner radius of the coil. The average radius is R1+H/2, the outer radius is R1+H. | |||||||||
| bW is the width of the coil, i.e., the cross section of the windings. | |||||||||
| cH is the height of the coil windings. | |||||||||
| dR denotes the Ohmic resistance at DC. In case of the measurement coils, it is the series resistance of both coils. | |||||||||
| eL denotes the inductance, measured with an inductance meter at 1 kHz. |
Official websites use .gov
A
.gov website belongs to an official
government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you've safely
connected to the .gov website. Share sensitive
information only on official, secure websites.