Skip to main content
. 2016 Jul 28;6:30695. doi: 10.1038/srep30695

Figure 4. Filament water sorption and its effect on mechanical performance.

Figure 4

(a) Representative stress-strain curves for CNF 2% and TOCNF 2% filaments in dry condition and after soaking in water for two hours. The drastic reduction in strength illustrates the deleterious effect of water. As a reference, tensile strength and elongation for viscose fibre (coarseness 0.17 g/km, diameter approx. 6 μm) are included18. The inset shows the profiles in wet state using reduced plot scales. (b) Water sorption analysis for CNF 2% filament. The profile added as a guide to the eye and identified with the square symbols refers to the development of the equilibrium moisture content (EMC) at RH 95%.