Figure - PMC

Skip to main content

An official website of the United States government

Here's how you know

Here's how you know

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

View full-text article in PMC

. 2015 Aug 26;61(12):4114–4125. doi: 10.1002/aic.14912

Search in PMC
Search in PubMed
View in NLM Catalog
Add to search

© 2015 The Authors AIChE Journal published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers

This is an open access article under the terms of the Creative Commons Attribution‐NonCommercial‐NoDerivs License, which permits use and distribution in any medium, provided the original work is properly cited, the use is non‐commercial and no modifications or adaptations are made.

PMC Copyright notice

Pressure (a) and normalized pressure (b) profiles in the radial direction in the particulate GSVR flow for HDPE (ρ_s = 950 kg/m³), d_p = 2 mm, 4 kg solids capacity at gas injection velocities of 55 m/s ( ); 70 m/s ( ); 85 m/s ( ); 100 m/s ( ); 110 m/s ( × ).

A gas injection velocity change indicates a change of gas flow rate, given that the slot thickness is constant in all experiments. [Color figure can be viewed in the online issue, which is available at wileyonlinelibrary.com.]

Inline graphic — Pressure (a) and normalized pressure (b) profiles in the radial direction in the particulate GSVR flow for HDPE (ρ_s = 950 kg/m³), d_p = 2 mm, 4 kg solids capacity at gas injection velocities of 55 m/s ( ); 70 m/s ( ); 85 m/s ( ); 100 m/s ( ); 110 m/s ( × ).

A gas injection velocity change indicates a change of gas flow rate, given that the slot thickness is constant in all experiments. [Color figure can be viewed in the online issue, which is available at wileyonlinelibrary.com.]