Table 1.

Table of constants associated with the constitutive and lumped parameter models.

Constant	Units	Value	Reference
R0	cm	252	Caulk et al., 2015
H0	cm	33.7	Caulk et al., 2015
b	dyne/cm2	0.00018	Caulk et al., 2015
$b_1^1$	dyne/cm2	2253	Caulk et al., 2015
$b_2^1$	dyne/cm2	0.869	Caulk et al., 2015
$b_1^2$	dyne/cm2	4629	Caulk et al., 2015
$b_2^2$	dyne/cm2	2.214	Caulk et al., 2015
$b_1^3$	dyne/cm2	427.7	Caulk et al., 2015
$b_2^3$	dyne/cm2	4.094	Caulk et al., 2015
α 1	degrees	90	Caulk et al., 2015
α 2	degrees	0	Caulk et al., 2015
α 3	degrees	27.7	Caulk et al., 2015
T act,max	dyne/cm2	118620	Caulk et al., 2015
a	unitless	13.1	Caulk et al., 2015
c	dyne/cm2	−4574	Caulk et al., 2015
λ M	unitless	1.7636	Caulk et al., 2015
λ 0	unitless	0.6119	Caulk et al., 2015
λ z	unitless	1.3	Caulk et al., 2015
RVx	dyne·s/(cm2·mL)	12 (107)	Bertram et al., 2011 (adapted)
RVn	dyne·s/(cm2·mL)	600	Bertram et al., 2011
so	cm2/dyne	0.03	Bertram et al., 2011 (adapted)
p0	cmH2O	−0.25	Bertram et al., 2011 (adapted)
μ	cP	1	Bertram et al., 2011
L	cm	0.335	Caulk et al., 2015
t c	s	2	Bertram et al., 2011