Skip to main content
. 2016 Feb 18;3(8):1500362. doi: 10.1002/advs.201500362

Table 2.

Device characteristics of some representative OSCs with different AILs

OSC type Anode configuration Active layer Cathode configuration V OC (V) J SC (mA cm−2) FF (%) PCE (%) Ref.
Con. ITO/PEDOT:PSS+Ag NPs PIDTT‐DFBT:PC71BM Bis‐C60 +Ag NPs/Ag 0.96 14.36 63 9.02 203
ITO/PEDOT:PSS+Ag@Au PTB7:PC71BM TiOx/Al 0.75 17.50 70 9.19 46
ITO/PEDOT:PSS/DIP SubNc/Cl6‐SubPc‐Cl BCP:C60/Ag 1.04 10.1 66.6 6.86 214
ITO/s‐MoOx P3HT:IC70BA Ca/Al 0.84 11.09 70.5 6.57 226
ITO/NiOx PTB7‐Th:PC71BM Ca/Al 0.79 18.32 63.1 9.16 240
Ormoclear/Ag/WO3 PTB7:PC71BM Ca/Al 0.75 15.2 66.6 7.63 247
ITO/ReOx PBDTTT‐C‐T:PC71BM Ca/Al 0.76 17.74 61.6 8.30 248
ITO/RuO2 PBDTBDD:PCBM Ca/Al 0.84 12.66 70.1 7.45 245
FTO/MoS2/MoO3 P3HT:PCBM Al 0.63 9.90 67.1 4.15 252
ITO/Cl‐GO PBDTTT‐C:PC71BM Ca/Al 0.72 17.0 62 7.59 258
ITO/n‐G/Au NDs PTB7:PC71BM:n‐MWCNTs PFN/Al 0.74 19.10 65.8 9.29 261
ITO/p‐PFP‐HD PTB7‐Th:PC71BM PFN/Al 0.78 16.3 71 9.03 266
ITO/CBA PTB7:PC71BM Al 0.74 16.47 70 8.48 267
ITO/O‐NiAc P3HT:ICBA Ca/Al 0.88 10.55 72 6.64 272
ITO/CuSCN PDPP‐2T‐TT:PC71BM Sm/Al 0.70 16.7 69 8.0 273
Inv. PEDOT:PSS+Au NPs/Ag PTB7‐F20:PC71BM ITO/ZnO ripple/ALD‐ZnO 0.68 17.25 67.2 7.93 201
PANI/Ag PSEHTT:ICBA ITO/TiO2/C60‐SAM 0.89 11.60 66.9 6.87 220
PFT‐3HT/Ag P3HT:PCBM ITO/ZnO 0.60 11.3 64.9 4.6 217
p‐doped P3HT/Ag P3HT:ICBA ITO/PEIE 0.80 7.7 63 3.9 222
V2O5/Ag P3HT:PCBM FTO/TiO2 0.56 10.69 50.5 3.09 236
VOx/Ag a‐PTPTBT:PC71BM ITO/ZnO 0.82 11.6 53 5.0 233
MoS2/Ag PTB7:PC71BM ITO/ZnO 0.72 15.90 71 8.11 253
GO/MoO3/Ag PIDTT‐DFBT‐TT:PC71BM ITO/ZnO/PCBM‐COOH 0.97 11.6 64.5 7.29 254
sGO/VOx/Ag PTh4FBT:PC71BM ITO/ZnO 0.76 13.2 67 6.7 255
WC/Ag PTB7:PC71BM ITO/ZnO 0.72 15.98 70 8.04 271

Note: Con. represents the conventional OSC; Inv. represents the inverted OSC.