Skip to main content
. 2016 Nov 23;16(11):1970. doi: 10.3390/s16111970

Figure 1.

Figure 1

3D printed µTesla pump. (A) The assembled pump is around an US quarter in diameter, printed in high resolution as demonstrated by the miniature engineering building of UM Dearborn; (B) Two µTesla pumps were coupled magnetically to the same stir plate to ensure exact pressure delivered to a microfluidic device, and visualized under a stereomicroscope; (C) Using this setup, gradients can be generated by µTesla pump to drive a microfluidic mixer network.