Table 1.
3D printer parameter for vessels, lid and LED strips holder
| 3D parameters | Vessel | Lid | LED strips housing lid |
|---|---|---|---|
| Printer | AW3D AXIOM | AW3D AXIOM | AW3D XL |
| Filaments | PC | PC | PLA |
| Infill (%) | 15 | 15 | 20 |
| Layer height (mm) | 0.3 | 0.3 | 0.3 |
| Extruder temperature | 310 | 310 | 200 |
| Build plate temperature | 140 | 140 | 60 |
| Extruder speed while extruding (mm s−1) | 60 | 60 | 60 |
| Extruder speed while travelling (mm/s) | 120 | 120 | 150 |
| Model weight (g) | 162 | 26 | 89 |
| Model volume (cm3) | 135 | 22 | 71 |
| Model cost ($, approx.) | 4.86 | 0.78 | 2.05 |
| Print time (h, approx.) | 7 | 1 | 3 |
Polycarbonate: 1.2 g cm−3, PLA: 1.25 g cm−3