Skip to main content
. 2017 Feb 9;7:42174. doi: 10.1038/srep42174

Table 1. Values of the fitting parameters of the volumetric EOS found by fitting the measured specific volumes to Eq. (12) with Eqs (13) and (14).

LC system (phase) T0 (K) A0 (cm3/g) A1/10−4 (cm3/g/K) A2/10−6 (cm3/g/K2) B(T0, p0) (MPa) b2/10−3(K−1) γEOS Adj.-R2 coeff.
6BT (Cr E) 250.75 0.9038 ± 0.0001 3.62 ± 0.03 0.58 ± 0.03 2983 ± 10 2.62 ± 0.06 3.97 ± 0.08 0.9986
8BT (Cr E) 301.5 1.0027 ± 0.0003 8.31 ± 0.11 0.22 ± 0.02 2384 ± 22 3.74 ± 0.23 7.82 ± 0.27 0.9997
7CB (N) 302.0 0.9983 ± 0.0005 9.57 ± 0.43 10.2 ± 2.2 1704 ± 60 18.5 ± 2.9 13.99 ± 0.64 0.9992
7PCH (N) 303.3 1.0493 ± 0.0002 9.23 ± 0.12 3.21 ± 0.35 1755 ± 16 9.71 ± 0.45 10.50 ± 0.16 0.9999
8PCH (N) 309.13 1.0609 ± 0.0007 10.5 ± 0.5 4.16 ± 0.03 1592 ± 65 12.2 ± 2.7 12.03 ± 0.74 0.9986
8OCB (N) 342.0 1.0052 ± 0.0001 9.28 ± 0.07 2.33 ± 0.14 1731 ± 6 9.76 ± 0.28 11.37 ± 0.10 0.9996

The reference state is fixed at the phase transition temperature T0 at ambient pressure p0 = 0.1 MPa.