Skip to main content
. 2004 Dec 5;5:53. doi: 10.1186/1471-2202-5-53

Figure 1.

Figure 1

Cone ECl estimated from the reversal of ICl(Ca). A) ICl(Ca) tail current was activated by applying a 500 ms step from -78 to -18 mV during a gramicidin perforated patch whole cell recording from a rod. A ramp voltage protocol (-98 to +52 mV, 1 mV/ms) was applied during the tail current and begun 25 ms after termination of the step. B. The same protocol was then repeated in the presence of niflumic acid (0.1 mM) to inhibit ICl(Ca). C. The ramp current/voltage relationship obtained in control medium (A) was subtracted from that obtained in the presence of niflumic acid (B) to yield a niflumic acid-sensitive difference current that reversed in this cell around -46 mV (after correcting for a liquid junction potential of -8 mV).