Table 2.

Additional parameters re-fitted as per Sekulić et al. (2015) to improve h-channel activation kinetics and passive properties. Shown here are the specific membrane resistivity, R_m, the specific membrane capacitance, C_m., and bias current needed to keep model somatic V_m at −74 mV as per the experimental data used for fitting. However, the bias current was not used in any of the high-conductance synaptic input simulations. For the fitted H channel steady-state activation function, see Figure 1—figure supplement 1.

DOI: http://dx.doi.org/10.7554/eLife.22962.004

Somatic H models					Somatodendritic H models
Rank	Cell	Rm (Ω·cm2)	Cm (µF/cm2)	Ibias (pA)	Rank	Cell	Rm (Ω·cm2)	Cm (µF/cm2)	Ibias (pA)
326	1	80,932	0.5119	−6.79	225	1	138,328	0.6603	−10.3
556	1	90,251	0.4981	−0.932	356	1	122,359	0.6515	−11.3
613	1	89,118	0.5282	−1.57	913	1	130,845	0.6524	−10.3
620	1	90,099	0.5025	−0.932	1230	1	131,079	0.6574	−11.2
689	1	79,102	0.5069	−8.19	1520	1	130,763	0.6520	−10.5
723	1	90,289	0.4950	−0.846	2050	1	131,588	0.6528	−10.5
755	1	80,939	0.5058	−6.83	2173	1	129,748	0.6505	−10.5
769	1	79,183	0.5057	−8.16	2286	1	130,703	0.6547	−10.4
26	2	64,872	1.046	−15.2	6	2	71,586	1.086	−7.0
31	2	68,312	1.058	−12.3	34	2	68,585	1.083	−7.04
39	2	63,968	1.060	−15.2	37	2	71,079	1.086	−6.9
43	2	63,041	1.042	−16.4	49	2	71,129	1.083	−7.04
45	2	66,584	1.058	−12.7	57	2	71,750	1.082	−5.76
60	2	67,959	1.048	−12.6	92	2	71,891	1.081	−6.56
67	2	68,083	1.047	−12.7	96	2	72,746	1.066	−2.13
68	2	64,339	1.053	−15.2	109	2	75,364	1.061	−2.18