Skip to main content
. 2017 Jun 1;110(22):223701. doi: 10.1063/1.4984838

FIG. 1.

FIG. 1.

Schematic of the setup used for electrospun deposition of multiwalled carbon nanotube (MWCNT)—polyvinyl alcohol (PVA) optical absorber composite onto the optical fiber end-face. The optical fiber protruded through a hole in the flat collector (insets: side view and front view). The MWCNT-PVA precursor was deposited via a syringe and injection pump, through a blunt metallic needle that was held at a high voltage (HV) relative to the flat collector.