Skip to main content
. 2017 Jun 14;7:3454. doi: 10.1038/s41598-017-03492-4

Figure 5.

Figure 5

In vitro test result for complete mass reduction. (A) Required treatment time for 90% mass reduction of 200 mg clot samples with the treatment conditions of 80 Vpp input voltage, 10% duty cycle, and 107 bubbles/ml injection with 100 μl/min flow rate (n = 3). The difference of treatment time between planar and concave prototypes showed no statistical significance. (B) A 200 mg clot sample decreased in volume and mass after 3.5 hr treatment (scale bar = 3 mm). The remaining small (~20 mg) fibrin (B2) was not completely removed by continued treatment (>4.5 hr).