Skip to main content
. 2017 Jun 15;7:3615. doi: 10.1038/s41598-017-03851-1

Figure 1.

Figure 1

Characterization of vascular grafts. (A) The schematic diagram for preparation of hybrid PCL/PDS grafts. (B) The morphology of vascular grafts was evaluated by SEM and CLSM. SEM images of cross-section of PCL (I) and PCL/PDS grafts (II) showed that they had favorable tubular structure. Fluorescent images of hybrid PCL/PDS grafts with red PCL fibers labled with DiI and green PDS fibers labled with DiO (III). SEM images of lumen surface of vascular grafts (IV,V,VI) showed all the fibers had a smooth surface with well-defined fiber morphology. The average fibers diameter (C) and pore size (D) of vascular grafts was calculated based on the SEM images of grafts lumen surface. (E) Surface hydrophilic/hydrophobic performance analyzed by WCA analysis (n = 4), and the corresponding images of water droplets on the different surfaces after contact of 20 seconds. (F,G and H) The transverse mechanical properties of vascular grafts (n = 3). *p < 0.05, # p < 0.001.