Skip to main content
. Author manuscript; available in PMC: 2017 Jun 21.
Published in final edited form as: ACS Biomater Sci Eng. 2016 Sep 26;2(11):2080–2089. doi: 10.1021/acsbiomaterials.6b00502

Table 1.

Characterization data of oPACEs

Name a OEDE/DES/MDEA/PDL (feed molar ratio) OEDE/DES/MDEA/PDL (molar ratio) b Mwc PDIc Nitrogen content (wt%)
oPACE1-6 10/90/100/11 6/94/100/11 1777 1.20 4.3
oPACE1-13 20/80/100/11 13/87/100/11 1827 1.21 4.2
oPACE1-24 30/70/100/11 24/76/100/11 1874 1.21 4.0
oPACE1-34 40/60/100/11 34/66/100/11 2169 1.28 3.8
oPACE1-43 50/50/100/11 43/57/100/11 2064 1.26 3.7
oPACE5-13 20/80/100/11 13/87/100/11 15963 2.13 4.0
oPACE5-20 30/70/100/11 20/80/100/11 13175 2.04 3.8
oPACE5-28 40/60/100/11 28/72/100/11 8767 2.00 3.6
oPACE9-8 10/90/100/11 8/92/100/11 18533 2.6 4.1
oPACE9-14 20/80/100/11 14/86/100/11 11187 2.09 3.9
oPACE9-20 30/70/100/11 20/80/100/11 9162 1.91 3.7
oPACE9-31 40/60/100/11 31/69/100/11 10092 1.99 3.3
oPACE9-36 50/50/100/11 36/64/100/11 8126 1.89 3.2
PACE 0/100/100/11 0/100/100/11 9937 2.31 4.5
a

The polymers are named as oPACEn-x, where n indicates OEDE (n) units in the copolymer, and x is the molar percentage of OEDE units vs MDEA units.

b

Measured by 1H NMR spectroscopy.

c

Measured by GPC with narrow polydispersity polystyrene standards.