Table 1.
Formulation and processing temperature of the composites.
| Samples | LiCl (wt %) | MAPE (wt %) | Processing Temperature (°C) |
|---|---|---|---|
| L0 | 0 | 10 | 240 |
| L0.5 | 0.5 | 10 | 235 |
| L1.0 | 1 | 10 | 230 |
| L1.5 | 1.5 | 10 | 225 |
| L2.0 | 2 | 10 | 220 |
| L2.5 | 2.5 | 10 | 210 |
| L3.0 | 3 | 10 | 200 |
| M5 | 1 | 5 | 230 |
| M15 | 1 | 15 | 230 |
| M20 | 1 | 20 | 230 |
| R | 0 | 0 | 240 |
LiCl (wt %): LiCl content in PA6/HDPE/MAPE/LiCl blends by weight; MAPE (wt %): MAPE content in PA6/HDPE/MAPE blends by weight (the weight ratio of PA6 was kept at 60%). Abbreviations of L0 - L3.0 represent the composites with the LiCl content of 0%, 0.5%, 1.0%, 1.5%, 2.0%, 2.5%, and 3.0%. Abbreviations of M5, M15, and M20 represent the composites with the MAPE content of 5%, 15%, and 20%. R represents PA6/MCC composites.