Skip to main content
. 2017 Aug 21;28(10):148. doi: 10.1007/s10856-017-5953-0

Fig. 1.

Fig. 1

Schematic of the custom designed flexion-compression test set-up. The lower metal cup was firmly attached to the materials testing machine. The spinal segment was fixated by means of PMMA to the lower and upper metal cup. A roller was mounted on the vertical actuator of the materials testing machine and was forced to traverse the slot in the upper cup introducing a flexion movement of the spine. A counter balance mechanism was applied to return the spinal segment to its neutral position