Skip to main content
. Author manuscript; available in PMC: 2017 Sep 9.
Published in final edited form as: Appl Opt. 2016 Jul 1;55(19):5208–5218. doi: 10.1364/AO.55.005208

Fig. 14.

Fig. 14

Knife-edge measurements corresponding to the WFS measurements shown in Fig. 13. Raw data is shown on the bottom. The MEMS mirror begins flat at Δz = 0 μm and has greater mirror sag as Δz increases in value. The entire optical system was removed for testing of the knife-edge response of the objective lens only (plotted using the heavy line at the Δz = 0 position).