Skip to main content
. Author manuscript; available in PMC: 2018 Aug 1.
Published in final edited form as: IEEE Trans Ultrason Ferroelectr Freq Control. 2017 May 29;64(8):1261–1268. doi: 10.1109/TUFFC.2017.2709623

Fig. 6.

Fig. 6

An illustration of the signal routing scheme from the phased array transducer to the back-end imaging system. The transducer array was located on the left, and the signals are routed through the flex circuit to a connector board, then to the satellite board of the cable assembly.