Figure 7.

AM fabricated carbon parts. a) 3D printed models fabricated using 3.8 wt% Graphene‐ABS composite filament. Reproduced with permission.131 Copyright 2015, the authors. Published under CC‐BY 4.0 license. b) Optical image of the printed microlattices. Reproduced with permission.132 Copyright 2015, the authors. Published under CC‐BY 4.0 license.Structures fabricated by 3D‐DLW c) before pyrolysis and (d) after pyrolysis. Reproduced with permission.133 Copyright 2016, Nature Publishing Group. e) Parts manufactured by SLS with carbon composites. Reproduced with permission.134 Copyright 2016, Elsevier. f, g) Optical images of the Cu/A_l2O₃ structures: i) dried, j) sintered. Reproduced with permission.135 Copyright 2016, Elsevier. h) SEM image of vertically aligned carbon nanotube forests catalyst sites deposited via inkjet printing. Reproduced with permission.136 Copyright 2013, American Chemical Society.