Figure - PMC

Skip to main content

An official website of the United States government

Here's how you know

Here's how you know

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

View full-text article in PMC

. 2017 Oct 23;7:13759. doi: 10.1038/s41598-017-14236-9

Search in PMC
Search in PubMed
View in NLM Catalog
Add to search

© The Author(s) 2017

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

PMC Copyright notice

Microstructures of bioinspired platelet-epoxy composites produced via robocasting of platelet pastes and comparison to natural analogues. (a,b,c) Schematic diagrams of the three morphologies (trans-filament, inter-filament and Bouligand) produced by controlling the printing direction, with fracture direction indicated. (d,e,f) SEM images of fracture surfaces of the three composites, infiltrated with epoxy. Scale bars 400 μm. (g) Photograph of composite parts produced from arbitrary CAD files to demonstrate the flexibility of the technique. (h) SEM images showing the microstructure of the printed part. Scale bars 10 and 500 μm.