Table 4.
Division zone | Elongation zone | Mature zone | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Slope | Correlation | No. cells | DZ-EZ limit | Slope | Correlation | No. cells | EZ-MZ limit | Slope | Correlation | No. cells | End position | |
A10 | 0.8 | 0.12 n.s. | 132 | 855 | 59.5 | 0.88 | 67 | 1,494 | 49.6 | 0.78 | 68 | 2,990 |
A31 | −6 | −0.42 | 78 | 676 | 50.5 | 0.9 | 95 | 1,368 | 65.9 | 0.73 | 70 | 3,126 |
A9 | −5.3 | −0.35 | 94 | 587 | 42.4 | 0.91 | 61 | 1,219 | 43.1 | 0.76 | 67 | 3,557 |
A8 | −3.2 | −0.36 n.s. | 17 | 553 | 59.2 | 0.83 | 34 | 1,100 | 49.4 | 0.77 | 37 | 2,459 |
A13 | −3.6 | −0.24 | 109 | 510 | 90.9 | 0.87 | 76 | 973 | 30.1 | 0.35 | 53 | 2,582 |
B33 | −0.2 | −0.01 n.s. | 103 | 439 | 201.8 | 0.82 | 36 | 672 | 15.1 | 0.21 n.s. | 59 | 2,198 |
B32 | −16 | −0.53 | 110 | 411 | 116.3 | 0.81 | 48 | 716 | 35.2 | 0.44 | 39 | 1,852 |
B19 | 11.6 | 0.42 | 30 | 366 | 118.8 | 0.85 | 31 | 600 | 21.2 | 0.36 | 36 | 2,283 |
A11 | −6.3 | −0.25 n.s. | 55 | 328 | 83 | 0.9 | 77 | 655 | 74.6 | 0.72 | 50 | 1,898 |
A12 | 1.3 | 0.05 n.s. | 49 | 320 | 102.5 | 0.91 | 44 | 722 | 13.3 | 0.33 | 77 | 2,967 |
B34 | −9.6 | −0.4 | 27 | 278 | 140.1 | 0.72 | 57 | 461 | 27.6 | 0.55 | 68 | 2,182 |
B20 | 1 | 0.02 n.s. | 48 | 232 | 201.4 | 0.88 | 52 | 574 | 15.9 | 0.44 | 34 | 2,775 |
B35 | −22.1 | −0.32 | 44 | 215 | 183.3 | 0.76 | 44 | 388 | 3.2 | 0.09 n.s. | 79 | 2,771 |
C25 | 159 | 0.75 | 18 | 144 | 30.6 | 0.82 | 110 | 1,961 | ||||
C28 | 108.6 | 0.53 | 40 | 115 | 9.4 | 0.26 | 111 | 1,424 | ||||
C26 | 28.1 | 0.82 | 133 | 2,115 | ||||||||
C27 | 22.7 | 0.72 | 136 | 2,172 | ||||||||
C30 | 27.6 | 0.69 | 170 | 2,214 |
For each lateral root (ordered in decreasing length of the division zone), the parameters of the piecewise linear function (slope × 1,000 in μm/mm, correlation coefficient for each zone –division zone (DZ), elongation zone (EZ) and mature zone (MZ), n.s. for non-significant−, limits between zones and position of the most shootward cell in μm) and the number of cells assigned to each zone are given.