Skip to main content
. Author manuscript; available in PMC: 2018 Nov 1.
Published in final edited form as: IEEE Trans Ultrason Ferroelectr Freq Control. 2017 Aug 31;64(11):1684–1697. doi: 10.1109/TUFFC.2017.2748050

Fig. 1.

Fig. 1

Images of the fabrication steps of a custom catheter hydrophone. (A) indicates a 0.5 × 0.5 × 0.3 mm PZT-5 crystal soldered between the leads of a (B) 1.77 mm OD coaxial cable. (C) shows the crystal-cable assembly after coating the tip with epoxy (D) shows the clinical drainage catheter. (E) displays the final assembly of the catheter hydrophone.