Skip to main content
. 2013 Jan 7;14(1):258–272. doi: 10.1120/jacmp.v14i1.4037

Figure 1.

Figure 1

Schematic overhead view of the Nucletron‐type 077.211 jig and Farmer chamber (not to scale). This jig was used to determine the AKR of the source. A modified form of this jig was used for TLD calibration Methods 1 and 2, however the source‐to‐detector distance was 50 mm for these measurements (i.e., catheter 1‐catheter 2 distance was 100 mm)