Skip to main content
. Author manuscript; available in PMC: 2017 Dec 11.
Published in final edited form as: Opt Eng. 2017 Aug 30;56(8):084110. doi: 10.1117/1.OE.56.8.084110

Figure 7.

Figure 7

Presence of systematic and random error in the 3D printed lenses. The top row (a) shows lens A_02, where all lenses have a similar error profile at different rotational angles. The bottom row (b) shows lens B_01, where the leftmost lens has a different surface error profile than the middle and right lenses. Thus, some error in the manufacturing process is random.