Skip to main content
. Author manuscript; available in PMC: 2018 Oct 1.
Published in final edited form as: IEEE Trans Biomed Circuits Syst. 2017 Jul 20;11(5):1041–1052. doi: 10.1109/TBCAS.2017.2712566

Fig. 8.

Fig. 8

Experimental amplifiers used for MPI imaging. MPI signals from the detector coil (with L of 500 μH and RL of 5 Ω are filtered for direct feedthrough interference [25] using a custom notch filter prior to signal amplification using (a) Berkeley custom low-noise amplifier and transformer setup as presented in this work, (b) directly connected to an SR560 preamplifier with 200 gain, and (c) a noninverting amplifier using the CLC1002 op amp with gain around 24.