. Author manuscript; available in PMC: 2019 Mar 1.

Published in final edited form as: Biomed Phys Eng Express. 2018 Jan 25;4(2):027005. doi: 10.1088/2057-1976/aa9491

Table 1.

Parts list for the open source, 3D printed preclinical MRI phantom

Part #^a	Description	Vendor	Part #	Quantity	Cost
1	Glass-Filled Nylon Bolts	McMaster-Carr	91221A218	5	$2.28
2	Phantom Top Piece	Custom	N/A	1	$46.00^b
3	Silicone Gasket	Custom	N/A	1	$4.00
4	Luer Fitting (10–32 Thread)	McMaster-Carr	51525K21	1	$0.57
5	Silicone Compression Piece	Custom	N/A	1	$4.00
6	Modified Micro-Centrifuge Tubes	Eppendorf	022431064	5	$0.55
7	Phantom Bottom Piece	Custom	N/A	1	$32.00^b

				Total	$89.40

Part #’s correspond to those listed in Figure 1(b).

2017 prices, actual prices will also vary depending on the printing method and printer used.