Skip to main content
. Author manuscript; available in PMC: 2019 Feb 3.
Published in final edited form as: Clin Biomech (Bristol). 2018 Feb 3;52:95–99. doi: 10.1016/j.clinbiomech.2018.01.016

Figure 1.

Figure 1

Schematic of where the stainless screws were placed on the lateral side of the femur. Each femur received three screws on the distal metaphysis and two screws on the mid-diaphysis for a total of five screws. Maximum screw stripping torque was digitally recorded for each of these sites. Reference point indentation was also performed at these same sites prior to screw application.