TABLE 2.
Model | DL half-values (Gy)
|
No. of snips/Gy | ||
---|---|---|---|---|
Single | Population | |||
48Ti (129 keV/μm) | SDM | 1.616 | 0.660 | 10.03 |
RND1 | 1.801 | 0.756 | 9.17 | |
RND2 | 1.630 | 0.723 | 12.33 | |
16O (16.3 keV/μm) | SDM | 1.754 | 0.744 | 9.61 |
RND1 | 1.718 | 0.720 | 10.0 | |
RND2 | 1.554 | 0.687 | 13.53 | |
0.4 keV/μm | RND1 | 1.691 | 0.699 | 10.17 |
RND2 | 1.537 | 0.670 | 13.74 |
Notes. The half-values in Gy are calculated for DL reduction per Gy of absorbed dose in the SDM, RDM1 and RDM2 models using (DTH,S, DTH,D and DLTH) set at (>1,000 Gy, 300 Gy, 0.5). The LET of 0.4 keV/μm is representative of δ rays and is used in the simulations performed in the RND1 and RND2 models. The number of snips per Gy shown in the last column is identical in the single and population analysis.