Skip to main content
. 2018 Feb 5;8(3):e2715. doi: 10.21769/BioProtoc.2715

Figure 2. An example of a sample run order is shown.

Figure 2.

At least 5 blanks (blue) followed by 10 equilibration samples (green) should be run at the start of an analysis. This is followed by 4 quality control samples (red), samples to be analyzed (purple), and then 2 quality control samples again at the end. The example shows a quality control sample run every 6 samples throughout the analysis, however, this can vary from every 6 to 10 samples.