Table 1.
Parameter values for Equations (1)–(5).
| Parameter | Value | Definition |
|---|---|---|
| A | 0.25 | Calcium source |
| B | 200 | Strength of calcium induced calcium degradation |
| C | 3, 125 | Calcium release depending on all forms of calcium and IP3 |
| D | 7.5 | Strength of IP3 blocking calcium degradation |
| E | 0.00125 | Calcium leakage |
| PLC | 100 | Strength of calcium induced IP3 release |
| ϵ | 0.001 | IP3 source |
| r | 10 | IP3 degradation |
| d | 10 | Diffusion rate |
| ud | 0.5 | Calcium degradation sensitivity to calcium |
| ed | 2 | Hill coefficient |
| ps | 0.1 | Calcium degradiation sensitivity to IP3 |
| es | 3 | Hill coefficient |
| up | 0.025 | IP3 production sensitivity to calcium |
| ep | 4 | Hill coefficient |
| ub | 2.25 | Calcium degradation sensitivity to calcium |
| eb | 2 | Hill coefficient |
| vc | 9 | Calcium release sensitivity to stored calcium |
| ec | 2 | Hill coefficient |
| upa | 0.45 | Calcium release sensitivity to cytosolic calcium |
| epa | 4 | Hill coefficient |
| upi | 1 | Calcium release sensitivity to cytosolic calcium |
| epi | 5 | Hill coefficient |
| pc | 0.1 | Calcium release sensitivity to IP3 |
| epc | 2 | Hill coefficient |
| L0 | 1.5 | Calcium store spacing |
All unit dimensions have been chosen to make u, v, and p have units of μMol, space is in μm and time is in seconds.