Table 2.
Compound ID | KAF# | R7 | Agonist | Antagonist | Antagonist | Inverse Agonist | ||
---|---|---|---|---|---|---|---|---|
| ||||||||
mMC1R | mMC3R | mMC4R | mMC5R | |||||
Agonist EC50 (nM) |
pA2 | Antagonist Ki (nM) |
pA2 | Antagonist Ki (nM) |
Inverse Agonist EC50 (nM) |
|||
NDP-MSH | 0.010±0.003 | EC50 = 0.06±0.01 nM | EC50 = 0.35±0.06 nM | EC50 = 0.10±0.01 nM | ||||
hAGRP(87-132)a | > 100,000 | 8.9±0.2 | 1.3 | 9.4±1.0 | 0.40 | > 100,000 | ||
1b | MDE5108-10c | Phe | 25% @ 100 μM | 6.3±0.1 | 500 | 8.2±0.1 | 6.3 | 130 (−10%) |
| ||||||||
2 | KAF2039-1 | Gly | 60% @ 100 μM | < 5.5 | 6.17±0.04 | 680 | −25% @ 100 μM | |
3 | KAF2039-3 | Ser | 35% @ 100 μM | 6.0±0.2 | 1,000 | 7.2±0.2 | 63 | −55% @ 100 μM |
4 | KAF2039-4 | Lys | > 100,000 | 5.7±0.1 | 2,000 | 6.60±0.06 | 250 | −40% @ 100 μM |
5 | KAF2039-5 | Asp | 40% @ 100 μM | < 5.5 | < 5.5 | −25% @ 100 μM | ||
6 | KAF2039-6 | Leu | > 100,000 | < 5.5 | 7.03±0.09 | 93 | −35% @ 100 μM | |
7 | KAF2039-7 | Nle | > 100,000 | 6.1±0.1 | 790 | 8.4±0.2 | 4.0 | −35% @ 100 μM |
8 | KAF2039-9 | Trp | partial agonist 1,100 ± 200 (50%) |
6.67±0.07 | 210 | 8.2±0.2 | 6.3 | 150 (−20%) |
9 | KAF2039-10 | Tyr | > 100,000 | 6.23±0.05 | 590 | 8.00±0.06 | 10 | −40% @ 100 μM |
10 | KAF2039-11 | Cha | > 100,000 | 5.8±0.2 | 1,600 | 7.0±0.03 | 100 | 780 (−20%) |
11 | KAF2039-13 | hPhe | > 100,000 | 6.5±0.3 | 320 | 7.30±0.06 | 50 | 290 (−20%) |
12b | KAF3094 | Ala | > 100,000 | 6.1±0.2 | 790 | 8.2±0.1 | 6.3 | −25% @ 100 μM |
Compounds were assayed in duplicate replicates and values are expressed as the mean ± the standard error of the mean (SEM) of at least 3 independent experiments. “Partial agonist”: partial agonist activity, with a maximal percent activated listed in parenthesis. “X% @ 100 μM”: Compounds that partially stimulated the receptor but were unable to generate a sigmoidal dose-response at 100 μM concentrations are listed by their percent activation at 100 μM. “> 100,000”: Compounds which showed no agonist activity at 100 μM are listed as > 100,000. “< 5.5”: The use of <5.5 indicates that no antagonist potency was observed in the highest concentration ranged assayed (10,000, 5,000, 1,000, and 500 nM). “X (-X%)”: For compounds that displayed inverse agonist activity and appeared to generate a sigmoidal dose-response, the average apparent potency at the inflection point and maximal decrease in basal activity at the plateau is listed. “-X% @ 100 μM”: For all other compounds with inverse agonist activity, the percent decrease observed in receptor activity compared to basal at 100 μM is provided. The pA2 values were determined using the Schild analysis with agonist NDP-MSH (pA2 = −log[Ki]).
This peptide has been previously published.48
These peptides have been previously reported.56