Skip to main content
. Author manuscript; available in PMC: 2018 Jun 11.
Published in final edited form as: Proc SPIE Int Soc Opt Eng. 2018 Mar 12;10578:105780J. doi: 10.1117/12.2292736

Figure 5.

Figure 5

The benchtop setup includes a 3D printed patient specific coronary model attached to a flow loop pumping a glycerol/water mixture to simulate the viscosity of blood. A flow damper is used to mimic the compliance of the aorta as well as distal resistance clamps to represent distal resistance acting on the vessels from the capillary beds.