Skip to main content
. 2018 May 7;26(10):13027–13041. doi: 10.1364/OE.26.013027

Fig. 1.

Fig. 1

Scanning architecture of SOPi. (a) SOPi is assembled by integrating a planar scan mirror based scanning geometry (shown in inset) into the OPM design. MO: microscope objective, BFP: back focal plane. (b) Part of assembled SOPi design showing the intended action of the scan mirror to control the scanning of light-sheet without a change in tilt while simultaneously de-scanning the fluorescence signal to provide a stationary emission beam.