Skip to main content
. Author manuscript; available in PMC: 2018 Jun 25.
Published in final edited form as: Phys Med Biol. 2018 Jun 7;63(11):115011. doi: 10.1088/1361-6560/aac504

Figure 7.

Figure 7

Illustrations of side readout configurations used to measure the achievable CTR for “sparse” sensor readout. 20 mm length crystals were tested with with four 3×3 mm2 SiPMs in the center of the crystals with (a) and without (b) ESR reflector on the “open” area at the bottom of the crystal. A similar sensor/reflector arrangement was also tested for 10 mm length crystals with two SiPMs ((c) and (d)).