Skip to main content
. 2018 Jun 13;53(2):539–550. doi: 10.3892/ijo.2018.4439

Figure 1.

Figure 1

Schematic principles of the microwave hyperthermia device. (A) Photographic appearance of the microwave hyperthermia device: The novel irradiation system consisted of a (B) 433 MHz microwave generator and computer control system with MW radiator and (C) a temperature sensor. (D) Schematic representation of the MW hyperthermia device. Petri dishes or plates were positioned under the radiator and exposed to microwave radiation at 433 MHz. (E) Changes in temperature and output of microwave. Blue line indicates the temperature of the cultured cells measured using thermometer probe 1 under the Petri dishes. Green line indicates the temperature of the surrounding circulating water measured by thermometer probe 2. The red line indicates the output of the incident wave. (F) Photographic appearance of the water bath system.